उत्पादन सूची

हामीलाई सम्पर्क गर्नुहोस

  • Lonkyou jinmemng मेशिनरी कम्पनी, लिमिटेड।
    • 0086-1369595458583737737zbf@jmbzjx.com
  • न। 98 Angangng एभिन्यू, Lonkkeou शहर, शान्डंग प्रान्त, चीन
    1
    X
    1

    रोटरी अण्डा ट्रे ट्रे मेशिन

    वर्गीकरण: अण्डा ट्रे मेसिन
    उत्पादन नम्बर। : 17272851824224
    भ्रमणको संख्या: 3666
    मुद्दाको मिति: 2024-10-22

    कोटिहरू:

    सम्पर्क गर्नुहोस्
    Pulp molding products with plant fiber pulp can be used entirely recycled or waste paper as raw material, the use of a unique technology is widely used in food made in full bloom, electrical packaging, agricultural, medical utensils, handicrafts and Protective Packaging fragile areas such as clean-tech green product. I produced pulp molding production lines, from pulping system, molding system, drying system, packaging system composed of four parts, the type of which there is a drum machine, flip, reciprocating and so on. Equipment with energy-saving, high degree of automation, simple operation, less labor and so on. The same machine by replacing the mold, can produce different specifications of the paper tray products and easy operation workers. प्रक्रिया ओभरभ्यूज1, कच्चा माल - कागज (वा शुद्ध कार्डबोर्ड) प्यारा फाइबरहरू, विशिष्ट सुविधाहरू सहितको उत्पादनहरू, स्लर्री भण्डारण ट्या ks ्कीहरू (जस्तै एक विशेष रूपमा स्लर्रीमा समायोजन गरिएको छ, एक विशेषमा स्लर्रीमा। भिजेको मोल्ड गर्दै, खाली ठाउँ र त्यसपछि राम्रो भिजेको सुख्खा, हट प्लास्टिक समाप्त भयो।2, उत्पादन प्रक्रिया: कच्चा माल (कागज) → हाइडव्यान्यर → → → mashing प्रणाली → MADHAIDER → Dirdoforming → Baleoforming → Bail → AWERGESE3, कच्चा माल: कागज नाप मोल्ड उत्पादनहरूको उत्पादन, मुख्यतया कच्चा माल फोहोर कागज, कार्डबोर्ड कागज र कागज मिलिंग फोहर कुना, कार्टन प्लान्ट, प्रिन्टिंग प्लान्ट। कच्चा माल, कम लागतको धनी संसाधनहरू, र फोहोरको रिसाइक्लि .्ग हो।कुनै फोहोर पानी र निकास ग्यास उत्पादन प्रक्रियामा डिस्चार्ज गरिएको छैन, उत्पादन प्रक्रियाको लागि पानी पुनर्स्थापित गरिएको छ र पानीलाई प्रदूषित हुनेछैन।,,उही उपकरणले सबै प्रकारका फोहोर कागजहरू प्रयोग गर्न सक्दछ विभिन्न कागज ट्रे उत्पादनहरू, अण्डा ट्रेनहरू, अण्डा बक्सहरू, फलफूलहरू, र इलेक्ट्रॉनिक उत्पादनहरूको भित्री उत्पादनहरू। यसको बहु उद्देश्यहरू छन्, र बिभिन्न बजार मागहरू पूरा गर्न सक्छन्। तान्ने प्रक्रिया:जलविद्युत कार्य सामग्री (फोहोर कागज वा मल) पानीमा कुटपिट गर्नुहोस् जसमा प्रीबोलास्टले प्रशोधन आवश्यकता अनुसार, पानीका आवश्यकताहरूको साथ लाइनमा गठन गर्यो।Model ZMZ20/12 ZMZ20/24 ZMZ20/16 ZMZ20/32 ZMZ20/40 ZMZ20/48 ZMZ20/64 Capacity 2500-3000 3000-3500 3500-4000 4000-5000 5000-6000 7000-8000 9000-10000 mould 12+3 24+3 16+4 32+4 40+5 48+6 64+8 Labor 4worker 4worker 4worker 5worker 5woker 5woker 6woker workshop 35*18*6m 35*18*6m 40*18*6m 45*18*6m 50*18*6m 50*18*6m 55*18*6m
    सुकाउने प्रक्रियाPulp products after pulping, after forming, generally contain higher moisture needed to remove dried product moisture. Drying production line use the natural gas, diesel oil, coal, electric or steam molded pulp products (HTF) as a heat source, heating the air, the molded after drying in hot air (150 ~ 180 ℃), the use of the fan out of the product evaporates water, to achieve rapid drying effect. The company design and manufacture of direct-fired fuel (gas) drying production line for the first time to break the habit of foreign partition burning design, with central heating mode, the drying temperature stability, reasonable, high thermal efficiency, high degree of automation integration; in energy consumption, production and other aspects are superior than other similar devices, access to national patents. Drying line electronic control system with centralized control, start the production line, stop, speed, check before the cabinet can achieve. While the dashboard display cabinet temperature real-time voltage, current, each workspace can cycle through displayDrying lines, there are single-line and multi-line drying drying; drying line single large area, workshop length can not be less than 45 meters; multi-drying lines, small footprint, workshop length & le; 30 m, height workshop & ge; 4.5 meters due to small size, can effectively save energy inside drying line.ग्राहकहरूले तिनीहरूको बिरुवा आकार र ऊर्जा अवस्था अनुसार छनौट गर्न सक्दछन्।आकार टेक्नोलोजीEgg care products after forming, after drying, the basic shape, egg tray can be finished after finishing or packaging and storage of artificial storage； Egg cartons and production process of industrial packaging products requires a multi-shaping process after drying with hot plastic machine plastic products, so neat and beautiful appearance products, achieve better tenacity, has better shock resistance . Shaping process generally electric (or HTF) is heated hot plate, the metal mold has a higher temperature (180 ~ 250 ℃), the use of pneumatic or hydraulic pressure, pressing pulp products, to setting effect. After surgery, some products also need to be labeled or printed surface patterns, text, etc. Customers can choose according to their specific circumstances。

    Inveriry गर्न अनुरोध गर्नुहोस्

    प्रतिलिपि अधिकार © 20225 Lainkou jonkkou जिनि and Machng मेशिनरी CO. LTD. सबै अधिकार सुरक्षित।

    हामीलाई सम्पर्क गर्नुहोस

    Inveriry गर्न अनुरोध गर्नुहोस्